Versatile pressure moulding machine for all applications in dental pressure moulding and orthodontics, equipped with scan technology and 6.0 bar working pressure, adjustable by pressure reducing valve on the unit. The unique thermally controlled infrared heater reaches working temperature in one second. All parameters such as temperature, heating and cooling times are programmed by reading the scanner or entering the corresponding code. The coloured 3.2" LCD display with a resolution of 320 x 240 pixel leads you through the single working steps of the pressure moulding process, providing further information on scanned material, its indication as well as a library with illustrated application hints for fabrication. Rear port for easy updates. Large model cup facilitates embedding of mounted models. Pellet container ensures optimum dispensing and storing of pellets.
- Technical data
- Power: 230/115/100 V, 750 W
- Working pressure: 0.5 - 6.0 bar
- Dimensions: (W x H x D): 520 x 240 x 440 mm
- Weight: 14 kgs
- 3 years warranty, 10 years warranty on availability of spare parts
FURTHER INFORMATION
- Operation manual BIOSTAR® VII
- Sales folder BIOSTAR®
- Guideline to solve technical problems with BIOSTAR IV-VII, MINISTAR®, MINISTAR S®, TWINSTAR®
- Application booklet for pressure moulding technique
- Indication chart on applications in the pressure moulding technique
- Overview on pressure moulding material
- Instruction for mounting the impact plate for BIOSTAR® / MINISTAR S®
- Video training: How to fabricate an occlusal splint using DURASOFT®
- Video training: How to fabricate an individual sports mouth guard
FAQ
No, you can only process material with a diameter of 125 mm in SCHEU-DENTAL pressure moulding machines. Make sure to use the correct material size to avoid any problems during pressure build-up. The rim of a too small blank gets pulled out from the clamping of balancing and locking ring. Thus, a precise and correct thermoforming result is not ensured.
Maybe there is a pellet on the edge of the model cup between material and clamping ring. Interrupt the thermoforming process, taking care the model cup rim is absolutely clean before closing the pressure chamber.
Leaking of air usually does not affect the thermoforming result, because the compressor is constantly supplying air. Nevertheless, you should check the following:
When working on the model platform,
- ensure the model is placed flush with the surface of the model platform. If it's not, trim the model flat or embed it into the pellets.
- sharp edges may have damaged or torn the material. If this is the case, remove the sharp edges on the model.
- the material may have moved when being clamped. In this case, clamp a new blank and restart the thermoforming process.
- the balancing ring may have got stuck. In this case, remove the balancing ring, clean, grease and reinsert it. Ensure it is freely movable!
When embedding the model into the pellets, sharp model edges may cause perforation mainly of thin material.
No, this is not possible. However, depending on the series of your pressure moulding device, you can set an individual heating time using the “clock” symbol on the keyboard of your device or by using the “+” and “-” buttons. Please refer to the manual of your device to find out which option applies to your device. The operation manual of the current series of our pressure moulding machines can be found on this site under "Further Information" for download. Operation manuals of previous device series are available under SERVICE on top of this web site.
